TFS121.doc version 2.2 06.01.02 ______________________________________________________________________________________________________ vi telefilter filter specification tfs 121 - 1 /4 ______________________________________________________________________________________________________ ______________________________________________________________________________________________________ vi telefilter vectron internationaletechnologies, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedances 1,53k ? // - 1,57 pf characteristics remark: reference level for the relative attenuation a rel is the minimum of the pass band attenuation a min . the minimum of the pass band attenuation a min is defined as the insertion loss a e . the nominal frequency f n is fixed on 121,5 mhz. d a t a typ. value variation/ limitation ______________________________________________________________________________________________________ insertion loss a e -max5db (reference level) ______________________________________________________________________________________________________ nominal frequency f n - 121,5 mhz ______________________________________________________________________________________________________ relative attenuation a rel f n 25 khz - max 3 db f n 125 khz ... f n 455 khz - min 20 db @ f n 455 khz - min 60 db ______________________________________________________________________________________________________ operating temperature range - 40 c ... + 85 c storage temperature range - 54 c ... + 100 ______________________________________________________________________________________________________ temperature coefficient tc - 0,036 ppm/k 2 - ______________________________________________________________________________________________________ frequency inversion temperature + 25 c - ______________________________________________________________________________________________________ generated: checked / approved: construction, pin connection and 50 ? ? ? ? matching network
TFS121.doc version 2.2 06.01.02 ______________________________________________________________________________________________________ vi telefilter filter specification tfs 121 - 2 /4 ______________________________________________________________________________________________________ ______________________________________________________________________________________________________ vi telefilter vectron internationaletechnologies, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. (all dimensions in mm) tfs 121 m3
TFS121.doc version 2.2 06.01.02 ______________________________________________________________________________________________________ vi telefilter filter specification tfs 121 - 3 /4 ______________________________________________________________________________________________________ ______________________________________________________________________________________________________ vi telefilter vectron internationaletechnologies, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. stability characteristics after the following tests the filter shall meet the whole specification: 1. shock: 30g, 18 ms, half sine wave, 3 sho cks each pl ane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,075 mm or 1g respectively, 1 octave per min, 10 cycles per plan, 3 plans; din iec 68 t2 - 6 3. damp heat: 90 % to 95 % rel. humidity, 40 c, 10 days; (steady state) din iec 68 - 2 - 3 4. resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "air reflow temperature conditions" on sheet 4; packing tape & reel: din iec 286 - 3, with exception of value for n and minimum bending radius; tape type ii , embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 1700 d o p o e f w p 1 embossed carrier tape cover tape g p 2 b o a o 21,4 0,1 d 1 tape (all dimensions in mm) w : 24 0,3 po : 4 0,1 do : 1,5 + 0,5 e : 1,75 0,1 f : 11,5 0,1 g (min) : 0,75 p2 : 2 0,1 p1 : 12 0,1 d1(min) : 1,5 ao : 7,1 0,2 bo : 13,9 0,2 d1 : 1,5 + 0,5 a c n w 1 w 2 reel (all dimensions in mm): a : 330 w1 : 24,4 +2 w2 (max) : 30,4 n (min) : >= 90 c : 13 0,25 the minimum bending radius is 45 mm. the mounting surface of the filters faces the bottom side of the embossed carrier tape. the marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket hole s on the right side of the tape.
TFS121.doc version 2.2 06.01.02 ______________________________________________________________________________________________________ vi telefilter filter specification tfs 121 - 4 /4 ______________________________________________________________________________________________________ ______________________________________________________________________________________________________ vi telefilter vectron internationaletechnologies, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. air reflow temperature conditions 1st and 2nd air reflow profile name: pre-heating periods main-heating periods peak temperature temperature: 150 c - 170 c over 200 c 255 c 5 c time: 60 sec. - 90 sec. 20 sec. - 25 sec. chip-mount air reflow profile time / sec. temperature / c 0 20 40 60 80 100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180 200 220 240 table for temperature vs. time during the air reflow process tolerance of temperatures: 5 c time / sec. temperature / c time / sec. temperature / c 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 205 60 121 195 230 70 134 200 255 80 143 205 230 90 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120
|
